BP DOCTOR MED
BP DOCTOR PRO 12 SMART WATCH
USER GUIDE 12.4.0
BPSMART WATCH Thanksgiving, I met you in the years like songs. Thank you for choosing this smart watch. This watch will provide higher help and enjoyment for your exercise and health. For your convenience, please read the instructions carefully and follow the steps in the instructions.
Quick description of the watch
Part introduction
Charging Method
Charging activation is required before the first use of the watch, using the equipped magnetic suction charging cable to attach to the metal point on the back of the hand table, the other end of the charging line access to the USB charging head or computer USB port.
Install the watch APP
Scan the following QR codes or enter major application markets to download and install
SmartHealth.
Device requirements: iOS 9. 0 and above; Android 4. 4 and above, Bluetooth 4.0 support.
- Open the mobile client to set up personal information
- Switch to the "Device" page and click on the binding device
- Click on your device in the list of scanned devices
- Binding completed
The main feature page
Step/Distance/Calories
View the number of steps you walk,the distance you walk, and calories you c onsume at any time of the day, and update to the APP simultaneously to view your motion data.
Blood pressure measurement
Accurate measurement Before testing, prepare to remove the airbag plug from the back of the watch, install the airbag, and install the airbag as shown Airbag
Note: A poor airbag assembly will plug cause the measurement to fail
Bend the airbag, wear the watch correctly, loosely moderately, not too loose or too tight (watch placed on the back of the wrist, airbags naturally extend, cannot curl between the strap and wrist)
Inaccurate wearing will result in inaccurate blood pressure measurements!
Measurement precautions
The subjects sat comfortably, their legs were not crossed, their feet were flat, their backs, elbows, forearms were supported, their watches were as tall as their hearts, their hearts relaxed and they did not speak.
Note: Failure to observe the Measurement Precautions will result in inaccurate measurement results!
Click to enter the precision measurement mode, click to start the measurement, follow the watch prompts to adjust the posture, waiting for the measurement. Please keep your watch as tall as your heart!
Note: The palms stretch, you can't hold your fist, your thumb is above.
The Measurement Begins
This watch uses pressurized synchronous measurement technology to detect the measurer's blood pressure and pulse during the pressurization process, and complete the measure ment at the same time as the pressure is over. When the air pressure value increases, the blood pressure watch detects the pulse and begins to calculate on its own
Displays the measurement results
After the measurement is complete, the blood pressure watch automatically exhausts and then automatically displays the measurement results.
Note: When the airbag is over-inflated for long time and causes discomfort to the user, the user can untie the strap directly.
The cause and handling of the measurement failure
1: Make sure that the strap and airbag are worn correctly.
2: Confirm that the airbag and its connections are tight and that there is a leak.
3: Make sure the airbag is curled between the strap and the wrist.
4: Whether the arms and body remain stationary when measuring.
5: Keep quiet during the measurement and do not speak.
6: After the determination is complete, wait 3 minutes for re-measurement
Consult your doctor for an explanation of the blood pressure measurement.
For patients with diabetes, poor blood flow (e.g. varicose veins in the limbs) or stroke, use under the guidance of a medical professional.
For patients with high blood pressure or other cardiovascular diseases, please refer your measurements to your doctor or to a medical professional who knows your condition.
Self-judgment and self-treatment are dangerous and can lead to deterioration.
Inaccurate wearing and use will result in inaccurate blood pressure measurements!
Quick Measurements
The photoelectric test method is quick and easy to test blood pressure, this data is for reference only. Requires greater accuracy Please use accurate measurements for blood pressure testing.
Body Temperature
Switch to the temperature test interface to access real-time temperature detection, monitoring data can be updated to the APP simultaneously, and there are test reports.
Note: When testing body temperature, the bottom temperature must be fully exposed to the skin (wear 10 minutes after wearing test) temperature test will be affected by environmental temperature difference, only serve as a warning reminder, please take medical professional equipment and doctor diagnosis
Heart Rate
Switch to the heart rate test interface for real-time heart rate detection, monitoring data can be updated to the APP simultaneously, and test reports are available.
Blood Oxygen
Switch to the blood oxygen test interface to enter the blood oxygen real-time detection, monitoring data can be updated to the APP simultaneously,and there are test reports.
Breathing Rate
Switch to the breath rate test interface for real-time breathing detection, monitoring data can be updated to the APP simultaneously, and test reports are available.
Sport Mode
Click on the Sport Mode interface to enter Motion Mode, which is available in a variety of motion modes. Click on the motion icon to enter the corresponding motion mode detection. Swipe up and down to switch motion mode, click Start calculation, and right-slip out of current motion mode.
Weather
The weather page displays information about the current weather and air quality. Weather information needs to be connected to the client before it can be obtained, and weather information cannot be updated if it is disconnected for a long time.
Note: The watch is not connected to the APP before there is no weather interface, need to connect app after the weather interface, the phone needs to turn on positioning.
Sleep
When you fall asleep, your watch automatically determines your sleep detection mode, automatically detects your sleep/light sleep/sleep duration throughout the night, calculates your sleep quality, and your sleep data can be updated to the APP simultaneously.
Note: Sleep data is only available if you fall asleep with your watch.
Timer of Watch
Click on the Timer to enter the Timer function and slide right to exit.
Information
Click on the information to view the content of the information, slide up and turn the page. Slide right out.
Camera
In the connection state, click on the camera to remotely control the phone to take pictures, click to take a picture, right slip exit.
Music
In the connection state, click music to control the music player on your phone.
Quick Features
Swipe down on the main interface to enter the shortcut function interface, select"Do not disturb" "Information" "About" "Settings" and other options, Click the icon to enter the corresponding function.
Concerning
Click on the About icon to display the machine model and Bluetooth address in the last four digits.
Brightness
Click on the brightness icon to freely select the screen brightness.
Raise Your Wrist
Click on the wrist lift icon to enter and select the wrist lift to turn on or off.
Reposition
Click on the reset icon to enter and restore the factory settings
Shutdown
Click the shutdown icon to enter and you can shut down.
Other Feature Reminders
The reminder function needs to set the on alert switch on the APP side and keep the phone and watch connected successfully in Bluetooth, the message is a vibration alert.
Precautions
1: Do not use an adapter with a charging voltage greater than 5V and a charging current greater than
2A for 2-3 hours
2: Do not charge in the event of water stains.
3: This product is an electronic monitoring product, not as a medical reference, measurement
data for reference only.
4: Keep the surface of the blood pressure watch clean and tidy, which helps to extend the life of the
blood pressure watch.
5: This product does not have waterproof performance, please do not wear for immersion, swimming, bathing and a series of may be the inside of the watch into liquid or water vapor operation. (After removing the bladder, plug the bladder plug to prevent liquid or moisture from entering the watch)
Wearable Blood Pressure Smartwatch
Article credit : Heidi Cohen ( https://heidicohen.com/use-blog-to-sell/ )